Thank you so much NAJ! I greatly appreciate your help getting my sons car operational. It make sense now on the grey wire as it ram across the harness to the pass side since the hood has been off the car for 2 years now. I completely forgot about it.
85 Daytona TZ need help identifying a few parts
This is the solenoid pack for the 1985 Daytona Turbo Z 5 speed car we are working on.
I have found out that the second one in from the radiator side is the waste gate control solenoid. Can anyone help me identify what the other 3 are for?
![Motor vehicle Hood Automotive exterior Automotive tire Gas]()
Then there are these two relays on the drivers strut tower. The furthest left wire is a grey fuse able link that the wire is about 4 feet long and goes no where with a female bullet connector on the end. What are these two relays for? I am assuming one is for the fan controller? And where does that grey wire go? thank you in advance!
Syleng1
![Motor vehicle Hood Vehicle Automotive exterior Gas]()
I have found out that the second one in from the radiator side is the waste gate control solenoid. Can anyone help me identify what the other 3 are for?
Then there are these two relays on the drivers strut tower. The furthest left wire is a grey fuse able link that the wire is about 4 feet long and goes no where with a female bullet connector on the end. What are these two relays for? I am assuming one is for the fan controller? And where does that grey wire go? thank you in advance!
Syleng1
