Turbo Dodge Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2,434 Posts
Discussion Starter #1
How much will it lower my 87 daytona Shaelby z (it's already pretty low compared to a non Shelby daytona). Part number and where to buy?
 

·
Registered
Joined
·
41 Posts
The part number is 2804.140 for the Eibach Pro kit. They sell them in Jegs for $250. I put them in my 89 Shelby Daytona a few years ago and was disappointed that the ride height didn't change but the ride stiffness changed a lot. It handles way better with the stiff springs but it's hard to find a strut that will match the spring rate. I have KYBs and they bounce too much. You really need the Koni's to match the springs but the KYBs work if you can't find Koni's.
 

·
Registered
Joined
·
137 Posts
I have the same set on my 88 and I just used the Monroe Sensa-trac struts and shocks. Been rolling with that setup for three years now.
 
1 - 5 of 5 Posts
Top