Turbo Dodge Forums banner

87 shelby z with some performance mods

693 Views 1 Reply 2 Participants Last post by  bulldog565
1987 Dodge Daytona Shelby Z

2.2 turbo 2
motor has been redone
92k on the odometer but it stopped working
garret 50 trim turbo
3 inch intake piping
3 inch turbo back exhaust mated to a dynomax ultra flow muffler
brand new R1 drift 18" rims never even seen the road
fresh silver paint
all red striping redone
absolutely no rust
Gray leather interior with all the power options
bosch adjustable fuel presure regulator
52lb injectors
turbo xs rfl blow off valve
walbro 255 in tank fuel pump
newer brake pads and rotors
brand new power steering pump just needs a pressure hose to the steering rack
has a low mileage a525 trans in it
car also comes with the original a555 trans but needs a 3rd gear dhift fork do to wear
lightweight underdrive pulley
car is on wastegate pressure now which is about 16 psi of boost.
has an upgraded mopar performance computer just cant remember which one
car has been sitting in my garage for the past three years as i have three other cars and just dont have the time for it.

The not so good:
Car needs new axles they still work but are worn out
needs front main seal which involves removing the oil pan. not hard at all
car would also benefit from an oil catch can as the crankcase is vented to atmosphere right now
needs an exhaust donut gasket. cuz when it idles you can smell the exhaust inside
All in all this car needs a little tlc. do to sitting in the garage but is in great shape considering its an 87
609 703 5474

See less See more
Not open for further replies.
1 - 2 of 2 Posts
This is a nice car But it is too far for me
1 - 2 of 2 Posts
Not open for further replies.