Joined
·
3,393 Posts
Looking good !!
I always run a large bastard file diagonally across the deck and head.
This gives me a good indication if there is warpage or not.
The idea is to have flat surfaces, more than smooth.
Shouldn't be any problem with the newer manifold.
I would never peen the cracks between the valves.
If it's a tall deck, now's the time to ditch the balance shafts!
Thanks
Randy
I always run a large bastard file diagonally across the deck and head.
This gives me a good indication if there is warpage or not.
The idea is to have flat surfaces, more than smooth.
Shouldn't be any problem with the newer manifold.
I would never peen the cracks between the valves.
If it's a tall deck, now's the time to ditch the balance shafts!
Thanks
Randy
