Turbo Dodge Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
190 Posts
Discussion Starter #1
I need an 88 TI harness, uncut, with injector harness and charger circuit harness, preferrably with the solenoids and relays as well. Also need an 88 2.2 TI SMEC.

It's for a Turbo conversion in an Aries.

Thanks :D
 

·
BAD SELLER!!!!!!!!!!!!!!
Joined
·
2,064 Posts
I have an '89 T1 harness and T1 SMEC. They are basically the same harness. I can also include the inj. harness, solenoids, relays, MAP sensor. All for $150 shipped. Let me know.
 

·
Registered
Joined
·
190 Posts
Discussion Starter #3
Thanks 1quik4, I sent you a PM, but I also forgot to mention the SMEC has to be for a 2.2L (so at least the SMEC has to be an 88), and the 89 T1 SMEC you have would be for a 2.5L.

Still looking. Thanks.

Maurice
 

·
BAD SELLER!!!!!!!!!!!!!!
Joined
·
2,064 Posts
Is there an '88 2.2L T1??? I wasn't aware. Maybe on a 600 or something. Well if you decide you need the harness and solenoids, etc, let me know.
 

·
Registered
Joined
·
1,572 Posts
1quik4 said:
Is there an '88 2.2L T1??? I wasn't aware. Maybe on a 600 or something. Well if you decide you need the harness and solenoids, etc, let me know.
The 88 Shadows and CSX-Ts were 2.2 TI. *cough*

How soon do you need it? The only cut that I'm aware of was for a fusible link that I had to replace with an inline blade fuse (wasn't able to find the right size fusible wire).
 

·
Registered
Joined
·
190 Posts
Discussion Starter #6
Thanks for the reply Supercrackerbox. :thumb:

Another board member is getting me the parts I need.

Also want to add that all 88 TI's are 2.2L. It is the only year the TI 2.2L came with the mitsu turbo and 1-piece intake.
 
1 - 7 of 7 Posts
Top