Turbo Dodge Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
143 Posts
Discussion Starter · #1 ·
Hello Guys,

I just bougth a nice 92 Iroc R/T, but the previous owner messes up with the pulley while replacing the alternator.
I need to put the belt back on, but i see that the tensioner arm is way up (normal since belt not installed) but it is rubbing against the power sterring pulley.
I guess it will re-aline it self out of the way when the belt will be there.
Otherwise the previous owner may have broken it??
I searched everywhere for a replacement but cant find one, all i can get is the idler pulley ...

I need your help!

The car is still at 2-3 hour from my place and i gota have to repair it on the spot to bring it home.

Thank!
 

·
Registered
Joined
·
1,000 Posts
Contact Cindy @ FWDPerfomance or Jackson (Lotofshelbys) on this forum, one of them should have a used one to sell you.
 

·
Registered
Joined
·
143 Posts
Discussion Starter · #4 ·
Ok , i got the car to my garage today, i removed the thing and the casting is freakin broken!
I need one RUSH!!
I sent email to Cindy fwdperformance, tryed to call but they may not be open yet (8:00am) so ill call later on.

If anybody have that part for sale pls contact me asap 1-514-668-1036
 

·
Registered
Joined
·
116 Posts
Mine was broken since the guy that was working on it used a wrench on it to rotate it instead of the 1/2" drive hole. It was siezed but I think it could have been broke loose without breaking it. Have fun finding one. It took me about a month. Good luck, Steve.
 

·
Registered
Joined
·
143 Posts
Discussion Starter · #6 ·
Fwd P. dont have these,

I finaly removed the whole bracket tonigth, im sending it to an engine machine shop tomorow morning to have it tig welded, i know these guys do miracles on engine heads so i guess it will be ok.

Waiting isnt a possibility for me, i imported the car and only have 5 day left to have it pass provincial inspection and get the plaque on.

So i need a working part on friday.

If ever the welding is no good, i may still buy from anybody who can send it ultra rush UPS tomorow afternoon.
Dont hesitate to call me
Kriss 514-668-1036
 

·
Registered
Joined
·
143 Posts
Discussion Starter · #8 ·
Thanx for the help,
I finaly fixed it, some welding.... some machining... it should stand up long enough to get the car verified and get my plaque on.

Im buying Lengel part. Lengel IS ROCKIN! thanks again for giving me a call
chek your email.
 
1 - 8 of 8 Posts
Top