Turbo Dodge Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
Hi Guys,
I'm in need of some help. I have a 1985 Omni GLH, with a 1988 Daytona Selby turbo II engine. I redid everything, but am in need of one last part. I have the air temperature sensor that plugs into the one piece intake, but I am missing the pigtail connector that plugs into it. I have the two wires going up to the intake, but no connector to plug into the sensor. I can rig it up, but that will look bad and could cause some problems if they came loose. Rather do it right. I'm in the Detroit area, but will pay for shipping, etc. Let me know if anyone out there has it?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top