Turbo Dodge Forums banner

All 2.2 Parts And Cars Must Go!! In Va

436 Views 5 Replies 6 Participants Last post by  boostedhatch

1= 1989 Cs Daytona Ags Performance Code, Complete, Straight Body, Rear Spoiler Is Loose, Motor Knocks, Intercoooler And All Assc. Hardware Still Intact, Trans Shifts Great, Black W/grey Int.

2= 1986 Shelby Charger Body In Good Condition, Burgundy And Silver, Roller Disassembled For Complete Color Change And Repaint, Project Never Finished, Factory Wheels Polished W/ Almost New Tires


Motor= T2 Block O-ringed (all Machine Work Done), T2 Forged Crank (machined), T2 Rods (machined), Je Custom Forged Pistons (nib), Total Seal Rings (nib), Bearings (nib), Arp Head Studs (nib), A Stack Of Mopar Perf. Head Gaskets (all New), Glenn Smith Racing Cylinder Head Ported And Polished-chambers Reworked-over Sized Stainless Valves-big Custom Spec Turbo Cam-adjustable Cam Gear- This Is The Head Off Of His Rwd Daytona(9.90's), Polished Factory Valve Cover, T2 Intake Manifold Fully Ported And Reworked W/ 3 Inch Elbow Tube & Custom 3.0 Throttle Body Flange, 3.0 Throttle Body, Custom Tbi Exh Manifold W/ Turbo Flange- Fully Ported, T3/t4 Hybrid Turbonetics Turbo (nib), Engine Never Assembled.

Fully Manual Auto Tranny, Mount Ear Broke In Accident, Worked Great.

Numerous 5-speed Trannys In Various Conditions

L-body Heim Joint 5-speed Shifter Linkage (stops All Broken Linkage)

Lots Of Other 2.2 Motors And Other Various Related Parts

Want To Sell Everything Together As A Package Deal

Asking Price $4000 Obo

Trades Considered= Mustangs, Darts, V8 S-10s, 1ton 4x4 Parts(chevy Or Dodge)

Located In N.va.

Pm Or Call (540)-383-4780

May Separate For Right Deal

See less See more
1 - 6 of 6 Posts
Too bad you are in VA, I could use quite a few of those parts, and I even have a 1 ton with a 454 in it that I would be willing to trade parts for. And I would really love to have the Charger.
do you have a 523 laying around with shifter and cables.
Welcome to TurboDodge.com Looks like some great parts are available:nodding:

We have For Sale section guidelines, please look them over and post the required information. Thanks!
Hello and welcome. I will try to be honest and please don't take this wrong,but you will probably do a lot better not selling a package deal. You might find the right guy,but there are way more folks interested in parts to finish a project.
Good luck.
1 - 6 of 6 Posts