I was wondering if anyone or if it is possible to swap the crossmember from a dual pivot into my glhs? I have spent too much time and effort into making the car fast and now I want to make it brake (which I have) and ride/handle better. Anybody.
Any help for l-body crossmember?
Join the discussion
Recommended Reading
-
Shocking discovery.
Transmission, Suspension, Brakes, Tires & Wheels"86 GLHT was sitting a little high in the rear, LOL.- 4
- 83
-
1986 Daytona Turbo Z suspension upgrade .
Transmission, Suspension, Brakes, Tires & WheelsHello , Looking for some advice on known suspension upgrades for my 86 Z Daytona . I want the car as low as possible , will be using 16" or 17" wheels . Are the newer dual pivot lower control arms off 89 cars better ? the rear axle from 89 Shelby Daytona ( bigger bar inside , welded ends ) ...- 7
- 261
-
AG lowering springs (from Mexico- 19luis8510)
Transmission, Suspension, Brakes, Tires & WheelsWell this forum is quite sleepy. After being out of the SD game since 2008 I was looking for some Eibach's for my recently purchased 88 CSX-T. I quickly learned that they are no longer available and hard to find second hand. I stumbled onto a thread where fellow member and Mexico resident...- 14
- 854
-
Using a 40/41TE Torque Converter in a a470/670 transmission.
Transmission, Suspension, Brakes, Tires & WheelsI have a pt cruiser project car and was getting ready to swap the transmission out but haven't thought about the torque converters not being the same. My question is can I use a torque converter from the stock transmission that is in the pt cruiser which is a 40te trans with a a470 trans out of...- 0
- 51
-
installing new rack & pinion
Transmission, Suspension, Brakes, Tires & Wheelsmy rack & pinion on my 1989 Chrysler lebaron seal where the steering shaft goes into it is leaking so I bought a new rack from advance auto do I have to drop the front crossmember? can I put it on jackstands the shop I could have used a lift closed up so ill be doing it in my driveway,,,- 2
- 379
Join now to ask and comment!