Turbo Dodge Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1 (Edited)
Neon Srt4 replace clutch master and slave cylinder, boost was fine prior to replacing parts .I notice broken wire on the harnes that is on top of trany now my odometer does not work and lost boost only 5 Psi. Also flushed radiator and replaced thermostat with 180 f.
Some pics wire is DG/Orange stripe





 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Got most of stuff fix still no speedo replaced vss ,ordering plastic gear and plug.
Any suggestion or ideas any body here has experience with electrical components on cars.
 

·
Administrator
Joined
·
10,120 Posts
I am going to send this to NAJ, you need the factory wire locations to know whats going on. Basically we need to know what is under the tape on the block connectors, then where the wires go can be found. I know they yank out there TB wiring a lot.
 

·
Administrator
Joined
·
25,012 Posts
Need the year of the car.

Are any fault codes set?
 

·
Registered
Joined
·
6 Posts
Discussion Starter #7
Thanks got it fixed , problem old mods don to car the speed sensor cable was cut at plug 101 were you could not see it and twisted by hand when replacing parts I must have pulled on harnesses the twisted wire came apart ,fixed it the right way.Everything is working like it should .Thanks
 
1 - 8 of 8 Posts
Top