Turbo Dodge Forums banner
1 - 1 of 4 Posts

· Registered
34 Posts
Discussion Starter · #1 ·
When I first start my 86 Omni GLHT from cold, the idle speed fluctuates so much for the first minute or two, that many times it stalls. I thought it was my AIS motor "hunting", but I disconnected the electrical connector and it still happened. I noticed that the Baro Solenoid was causing this idle speed fluctuation. I read in the service manual that the Baro solenoid is actuated periodically at closed throttle every 30 seconds or so.

If I try to bypass the vacuum signal directly to the MAP sensor, what are the ramifications?

I hate the way it idles...
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.