Turbo Dodge Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2,434 Posts
Discussion Starter #1
What are peoples experiences with the FWD Perf F3 cams? I'm interested in one of these for my daytona. I'm running an 88 TBI roller (or at least that's what I think I'm running - is there a way to tell)?

I'm looking for a cam to make good power on a heavier daytona 5 speed, 18-22 PSI boost, 2.5 Litre, Super 60 turbo, 3" exh, cummins intercooler, 3 bar custom stage 5 cal, forged pistons, common block, ported + 1 head, 2 piece intake (stock).
 

·
Registered
Joined
·
2,434 Posts
Discussion Starter #3
It's under my avatar. 13.7 @101 with aprox 2.0 60'time at 18 psi boost. I've since upgraded my clutch to a 4 puck as the t2 clutch and t3 pressure plate (I think that was the combo I was running before) was starting to be overpowered.
 
1 - 3 of 3 Posts
Top