Turbo Dodge Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,630 Posts
Discussion Starter · #1 ·
I have a new "Sealed Power" brand camshaft, I purchased it for an 88 Daytona turbo, its a roller cam, I was assuming that it would be the same as the stock 88 roller cam and work without a -4 degree key. Unfortunately I learned that it lists the same part # to work with 89 and 90 Daytona also. Am I going to need that -4 degree key for this cam to work properly?

Any help is appreciated!

Thanks! :thumb:
 

·
Registered
Joined
·
1,505 Posts
Should be the cam your looking for.
Verify by indexing against the cam gear.

How the hell Ma Mopar figures that 236' @ 0.02" = 194' @ 0.05" Is still beyond me.
 
1 - 5 of 5 Posts
Top