[Shadow_Geek]

I just bought a Daytona pacifica and the dash was removed.
The owner instead of just unplugging it cut the pigtails because he needed the connectors.

What should I do?
Should I just replace the connectors with another digi-dash?
Or should I lengthen the wires(they were kinda short when I looked) and attach some custom analog guages?

 

[1970 beepbeep]

Digi dash gets my vote, but Im old school and prefer factory over mod. Just my 2 cents.

 

[Rock Kustoms]

i have the whole wiring harness still in my daytona that i dont need, its a 91. pm me

 

[jory]

If it's a Pacifica it's a 2nd gen Daytona. The 91 is a 3rd gen.

 

[Rock Kustoms]

92 is the first year of the 3rd gens

 

[kermit]

my vote is to go with the stock regular gauges rather than the digital ones. We had those on our Lebaron...they sucked. To me they never looked that good, the lcd was unevenly lit, and some were burnt out and others were always lit.

Maybe they aren't all like that, but then you have to go through the trouble of finding a good set (i don't know how hard that is). Personally I like the no hassle of the regular gauges.

 

[Shadow_Geek]

Will the stock analogs work with the digi dash setup?

I've never seen a working digi dash so I wouldn't know what to say in looks.
I have seen an analog setup, and I liked it a lot better than my current p-body setup.

 

[kermit]

It can be rewired. My dad did it to his 87 Lebaron using the service manuals. I believe that they are all the same wires, they just have different connectors.

Since he obvioulsy has to do wiring anyways for the connections, it would pretty much be the same amount of work.

 

[tryingbe]

Kermit, your digi dash was broken, that's why you had all the problem.

I love my digi dash.

 

[TurboPacifica]

I love the digidash I have them on both my Daytona Pacifica's
They both work fine.

TURBOPACIFICA - TJ's Custom Garage on CarDomain - Bergenfield, New Jersey car pictures and photos at CarDomain.com


I would try to reinstall a orginal digidash.
It should be easy if you find a donor car.
Just match up the wires

 

[overboostperformance]

i have the whole wiring harness still in my daytona that i dont need, its a 91. pm me

not to thread crap but 1991 is not the same dash as the 1st(1984-1986) and 2nd (1987-1989) gen daytonas interior wise. so it would not work.

Norm