Turbo Dodge Forums banner

dodge lancer sub frame

1604 Views 4 Replies 4 Participants Last post by  detobias
Ok I have a 1988 dodge lancer es, I need to replace the sub frame

So my question is what other cars use the same sub frame
If possible list years makes and models

Any help will be greatly appreciated
1 - 5 of 5 Posts
I'm assuming you're referring to the front "k-frame". Use the search and look for "k frame"

Here is a good one:
http://www.turbododge.com/forums/f4/f22/356164-k-member.html
Shadow, daytona, K-car, aclaim, lebaron are all showing they fit. looks like everything but Omni and minivans
I'd recommend a k-frame from any 89-90 car except for the L-bodies (and vans of course)
Make sure to get the complete K frame with lower control arms. Then get a poly control arm bushing kit from Energy Suspension like this:
Ebay link

According to Energy Suspension look for these cars:
Dodge Aries 1989 - 1989
Dodge Daytona 1989 - 1990
Dodge Lancer 1989 - 1989
Dodge Spirit 1989 - 1990
Plymouth Acclaim 1989 - 1990
Plymouth Reliant 1989 - 1989
Plymouth Sundance 1990 - 1990

ES seemed to forget about the Lebaron for some reason
See less See more
I'd recommend a k-frame from any 89-90 car except for the L-bodies (and vans of course)
Make sure to get the complete K frame with lower control arms. Then get a poly control arm bushing kit from Energy Suspension like this:
to clarify,
this would upgrade your pre-89 'single pivot' to the 89+ dual-pivot style of LCA,
certainly a worthwhile upgrade to consider

but to answer your OP:
any pre-89 EEK (i.e. all FWD except L- & S-bodies) *should* be identical to yur 88 H-body...

a manual trans k-frame would have a bracket for the bobble strut.. can be added to a A/T k-frame
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top