Turbo Dodge Forums banner
Status
Not open for further replies.
1 - 7 of 7 Posts

·
Registered
Joined
·
876 Posts
Discussion Starter · #1 ·
Hi folks,

Got a ford V8 coil, but can't seem to match up a spark wire for the top of the coil to the dizzy. Everything I find has the wrong ends on. What ones are you using?
 

·
Registered
Joined
·
99 Posts
you will probably have to make a cable. go to a good auto parts store and see if they have plug wire ends and get a spare cable to make a coil wire. its not to hard to do. just becareful not to nick the core in the cable.
 

·
Registered
Joined
·
9,532 Posts
Most people who do that have Magnacor wires which come with a short wire that is meant for installation on a Mitsu Montero.
Even then, you have to mess with the wire to make it female instead of male. I use a wire to hold my coil wire to the coil.
 

·
Registered
Joined
·
876 Posts
Discussion Starter · #7 ·
Ah, got diverted is what. My manuals I needed to help sort the wiring out went missing, and just turned up a couple of days ago, got other fish to fry at the moment so will let you know when I get back to it.
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top