Turbo Dodge Forums banner
1 - 2 of 8 Posts

· Registered
1,526 Posts
Unless I'm mistaken, when it shuts off the pump there's still pressure in the lines, so it does go lean briefly before it dies. You could have a wiring issue in the harness leading to the HEP. That could explain the intermittent problem and the "jiggling the wires" issue. Those old wires do become brittle. If you can, check the continuity of those wires.
1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.