Turbo Dodge Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
Have a question about the front hubs on my '84 Rampage. I'm wondering if the hubs off my 88 shadow will fit the Rampage.
Rockauto.com lists part #518500 for the Rampage and 518502 for the shadow and 84 shelby charger.
I want to put my 5 lug wheels from the shadow on the Rampage.
Will the hubs interchange? Same spline count and diameter?
Thanks for looking.

J
 

· Helping when I can
Joined
·
1,327 Posts
different splines, I believe. Try 5 lug L-Body hubs from like 85 maybe.
 

· Registered
Joined
·
17 Posts
Discussion Starter · #4 ·
From TIMKEN's web site:
http://www.timken.com/en-us/products/Documents/BearingSpecGuide7534.pdf
page 136 PDF page139

518500 4.80 3.94 M12x1.5x44-6 2.24 2.40 - 2.99 3.70 M8x1.25 - 26 N
122.00 100.00 G 56.85 60.87 76.00 94.00 (3)(4)
518501 4.96 3.94 M12x1.5x44-6 2.24 2.40 - 2.99 4.46 M8x1.25 - 26 N
126.00 100.00 G 56.85 60.87 76.00 113.00 (3)(4)
518502 4.96 3.94 M12x1.5x44-6 2.24 2.40 - 2.99 4.46 M8x1.25 - 26 N
126.00 100.00 G 56.85 60.87 76.00 113.00 (3)(5)

The only difference between the Rampage hub and the others is the hub diameter (that mates to the wheel) and the bolt circle that holds the hub to the knuckle.

I'm gonna pull of my wheel and rotor and see if I can redrill the knuckle for the 518502.

Or has this been proven to not work?
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top