Front Struts??
Join the discussion
Recommended Reading
-
AG lowering springs (from Mexico- 19luis8510)
Transmission, Suspension, Brakes, Tires & WheelsWell this forum is quite sleepy. After being out of the SD game since 2008 I was looking for some Eibach's for my recently purchased 88 CSX-T. I quickly learned that they are no longer available and hard to find second hand. I stumbled onto a thread where fellow member and Mexico resident...- 13
- 802
-
1986 Daytona Turbo Z suspension upgrade .
Transmission, Suspension, Brakes, Tires & WheelsHello , Looking for some advice on known suspension upgrades for my 86 Z Daytona . I want the car as low as possible , will be using 16" or 17" wheels . Are the newer dual pivot lower control arms off 89 cars better ? the rear axle from 89 Shelby Daytona ( bigger bar inside , welded ends ) ...- 6
- 207
-
Using a 40/41TE Torque Converter in a a470/670 transmission.
Transmission, Suspension, Brakes, Tires & WheelsI have a pt cruiser project car and was getting ready to swap the transmission out but haven't thought about the torque converters not being the same. My question is can I use a torque converter from the stock transmission that is in the pt cruiser which is a 40te trans with a a470 trans out of...- 0
- 38
-
installing new rack & pinion
Transmission, Suspension, Brakes, Tires & Wheelsmy rack & pinion on my 1989 Chrysler lebaron seal where the steering shaft goes into it is leaking so I bought a new rack from advance auto do I have to drop the front crossmember? can I put it on jackstands the shop I could have used a lift closed up so ill be doing it in my driveway,,,- 2
- 358
-
3.0 V6 5 speed '91 Daytona
Transmission, Suspension, Brakes, Tires & Wheels3.0 V6 5 speed I have a '91 Shelby 2.5L auto, that I want to swap to a 5 speed. Does a 5 speed from a '91 3.0 Daytona have the same bellhousing? Is that trans the 543? Will that trans work behind a 2.5L?- 8
- 99
Join now to ask and comment!