Turbo Dodge Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
185 Posts
Discussion Starter · #1 ·
quick question my heater works fine from the floor but does not work from the dash i have took everything off and everything seems to be connected i have a 1990 dodge daytona es, automatic any results on how to fix this its cold out and i hate freezing driving to work in the morning thanks in advance...
 

· Administrator
Joined
·
26,469 Posts
Sounds like a mode door problem, be sure vacuum is changing at the control head when you change modes and that vacuum is getting to the proper mode door actuator and that the actuator and door are actually moving.



 

· Administrator
Joined
·
26,469 Posts
All the info comes from my 1990 FSM's, Old training Manuals, Mitchell On Demand, and Dealer Connect, being a Chrysler (Jeep) tech has its advantages and I am more than happy to pass the info on to you guy's.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top