Turbo Dodge Forums banner
1 - 20 of 34 Posts

·
Registered
Joined
·
12,120 Posts
Discussion Starter · #1 · (Edited)
Need To TII My GLH Sale!​

Seller's Information:
  • Name: Clayton Dennis
  • Location: Oklahoma
  • Contact: [email protected] or Private Message
  • Feedback: iTrader: 20+ 100%

If I locate more i'll edit this post:nodding:

Will Entertain Offer's(Cash and/or Trades). Just Ask! Need These Gone As Quickly As Possible!!!​
  • 90 TI/Manual P-body wiring(Engine/Body/Dash/Solenoids/ THE WORKS!- Convert that N/A Shadow/Sundance!) with SBEC $200
  • 89 Garrett TII Turbo(Boosted Strong on my CSX(4months ago or so). Small can is with it now, if I can locate the big can i'll swap them! $200
  • FWD Performance Stage 5 Calibration SOLD!
  • Fidanza Adjustable Cam Sprocket ~ $85
    Square Tooth
    Need's Cleaned
    Missing: 1 button head bolt, fender washer, lock washer, nut

  • Turbo XS Boost Control ~ $60shipped
    Bought Used, No instructions
    Works as a boost control, the allen head cap will need to be replaced to have the wastegate bleed part of this control.
  • Mahle Cast TII Pistons(Rings Not Included) $35
    Full Floating
    Stock Wrist Pins and C-clips Included

  • Crane Cams PS9-1 Ignition Coil SOLD!
The Fine Print! lol
All item's are sold used, as is, where is. Shipping not included(unless otherwise stated/negoated). Insurance/Comfirmation Number's(USPS) are at buyer's expense. Insurance/Tracking Number provided for FedEx(Insured for $100, anything over is buyer's cost). Once shipped item's are not my responisiblity(If insured I will aid in a refund from the carrier service). Payment methods: PayPay(add 2.9% + $0.30); Money Orders and Checks will be disposited and part(s) will not be shipped until cleared by the bank. Cash is always welcomed in my house!​
 

·
Registered
Joined
·
4,829 Posts
Re: Crane Cams, TII Pistons, FWDP S5, Fidanza ACS, Digital Dash, Turbo XS MBC

So what, you got the new pistons, and are getting rid of the old. LOL
 

·
Registered
Joined
·
403 Posts
Re: Crane Cams, TII Pistons, FWDP S5, Fidanza ACS, Digital Dash, Turbo XS MBC

gotta post to say I have that same boost controller, works VERY well! Definitely a good buy.
 

·
Registered
Joined
·
12,120 Posts
Discussion Starter · #11 ·
Re: Crane Cams, TII Pistons, FWDP S5, Fidanza ACS, Digital Dash, Turbo XS MBC

Bump!!!
Need To TII My GLH Sale!​

Seller's Information:
  • Name: Clayton Dennis
  • Location: Oklahoma
  • Contact: [email protected] or Private Message
  • Feedback: iTrader: 20+ 100%

If I locate more i'll edit this post:nodding:

Will Entertain Offer's(Cash and/or Trades). Just Ask! Need These Gone As Quickly As Possible!!!​
  • FWD Performance Stage 5 Calibration $165
    88/89 Electronics
    2.2/5speed
  • Fidanza Adjustable Cam Sprocket ~ $85
    Square Tooth
    Need's Cleaned
    Missing: 1 button head bolt, fender washer, lock washer, nut

  • Turbo XS Boost Control ~ $60shipped
    Bought Used, No instructions
    Works as a boost control, the allen head cap will need to be replaced to have the wastegate bleed part of this control.
  • Mahle Cast TII Pistons(Rings Not Included) $35
    Full Floating
    Stock Wrist Pins and C-clips Included

  • Crane Cams PS9-1 Ignition Coil $40shipped
    Mounting Bracket Included
    Easy To Install & Wire Up(Ground/Hot Done!)
The Fine Print! lol
All item's are sold used, as is, where is. Shipping not included(unless otherwise stated/negoated). Insurance/Comfirmation Number's(USPS) are at buyer's expense. Insurance/Tracking Number provided for FedEx(Insured for $100, anything over is buyer's cost). Once shipped item's are not my responisiblity(If insured I will aid in a refund from the carrier service). Payment methods: PayPay(add 2.9% + $0.30); Money Orders and Checks will be disposited and part(s) will not be shipped until cleared by the bank. Cash is always welcomed in my house!​
 
1 - 20 of 34 Posts
Top