Turbo Dodge Forums banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
2,558 Posts
Discussion Starter #1
the car is a 1986 lancer es turbo. The block is a 89 2.5 with a 87 glhs top end. the harnes is from a 89 2.5 t1 mini. Ok now the car starts and idles fine but the pl (power loss) light is on. when i pull my codes i get a 32 and a 36 and when i looked them up i get Wastegate control solenoid for 36 and EGR valve stuck open or closed for 32. this is a turbo car and from what i can see there is no egr valve. also both of these codes say that the pl light should be off so why is it on?
 

·
Administrator
Joined
·
25,001 Posts
What is not connected electrically or not connected properly?

89 California Turbo used EGR.
 
1 - 3 of 3 Posts
Top