Turbo Dodge Forums banner

HVAC Controls

447 Views 4 Replies 2 Participants Last post by  86GLHS481
Hi, '86 Omni, having a problem with the hvac. I can't get air to change directions when I make a selection. Can't get it to go to the floor or defrost, stuck on vent currently. My vacuum lines are connected correctly according to the attached diagram. Not sure what's going on.


See less See more
1 - 4 of 5 Posts
Ok thank you. I will re-route via the diagram and see if that fixes it
Is there a better diagram? Things are kind of blended in and hard to follow what goes to the main connector block.
Disregard that last request. I got it! Works perfectly now. Thank you!
  • Like
Reactions: 2
1 - 4 of 5 Posts