[mike dahl]

i had a thread about this before and check everything everyone brought to me the motor is on a fresh rebuild no vac leak everything is tight cant figure out the problem.please help:bang head

 

[impuresoul2k3]

Check out the idle problems sticky

 

[mike dahl]

well all i can see is maybe the timeing is off how do you adjust it with out messing anything up

 

[InfinityShelbyZ]

Tested AIS/TPS?
Timing would be my first one though also...

 

[mike dahl]

im new to cars so how do you lower the timeing

 

[mike dahl]

still need help

 

[85daytona]

Not lowering...you need to check the cam timing along with distributor heres how

DDG- Quick and easy timing belt check

Good Luck and don't worry take your time and everything will go ok. :thumb:

 

[mike dahl]

thanks for the help but one question how do you turn the motor by hand

 

[85daytona]

I dunno about "by hand" exactly I 've taken a socket wrench to the crank pully center bolt to turn it but make sure its turning its usual direction though :thumb:

 

[mike dahl]

thank you for all the help.thats what i will do