Injector Opening time
Join the discussion
Recommended Reading
-
smec part number
Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel Ratios5235113 ive checked in alot of places and it dosnt appear anybody can tell me what its from?- 14
- 1K
-
ednutcracker · updated
-
fuel pressure? or possible HEP problem?
Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel RatiosCar is a 1987 GLHS with a MP Stage 2 computer, +20 injectors, big intercooler, walbro 190 pump, 15psi. I'm getting 53psi at idle and what happens is the car gets around 10psi boost and starts bucking and breaking up, boost only goes to 12psi because of the bucking and fuel pressure is reading...- 2
- 431
-
Recondition Your Sending Unit!
Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel RatiosEver since I got my '89 Lancer Shelby the fuel gauge would only read from full to about half. I eventually got tired of guessing how much gas I had in the tank so I decided it was time to fork up the money and buy a new sending unit. But while I had the old one out I got to thinking..."What the...- 14
- 5K
-
Mudman · updated
-
5200, 5220 Holley for draw through turbo
Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel RatiosI have been researching draw through setups . I was thinking about buying a 5200 Holley from a Svo mustang for my draw through setup I'm toying with. Is the 5200 vaccume secondary? Because I have read the 5220 is . How does the 5220 secondary work and will it work on a draw through setup if I...- 10
- 951
-
Got a few questions
Engine Mgmt., Fuel, Spark, EGTs, & Air/Fuel RatiosI took a 89 Omni that was fuel injected and put in a older motor that has the 4 bolt crank instead up the 5 bolt in the 89 and I put a B&m supercharger on the the older motor with a 4412 2 barrel Holley carb with 7.5 power value and 70 size jets. I left the factory wiring in the car taped back...- 7
- 319
Join now to ask and comment!