Turbo Dodge Forums banner
1 - 1 of 1 Posts

· Registered
1989 Dodge Shadow 2.5 non turbo 3 speed automatic
Joined
·
340 Posts
Just for laughs you could try to grind down until you find the bottom of the crack then fill the cavity with high temp jb weld. Then sand down the epoxy to be flat. Slap it back together and see what happens.

 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top