Joined
·
1,002 Posts
would the KYB front spring rubbers and covers that fwdperformance.com work with the bilstiens they also sell?
thank you
thank you
kyb rubber with bilstiens
Join the discussion
Recommended Reading
-
AG lowering springs (from Mexico- 19luis8510)
Transmission, Suspension, Brakes, Tires & WheelsWell this forum is quite sleepy. After being out of the SD game since 2008 I was looking for some Eibach's for my recently purchased 88 CSX-T. I quickly learned that they are no longer available and hard to find second hand. I stumbled onto a thread where fellow member and Mexico resident...- 14
- 834
-
1986 Daytona Turbo Z suspension upgrade .
Transmission, Suspension, Brakes, Tires & WheelsHello , Looking for some advice on known suspension upgrades for my 86 Z Daytona . I want the car as low as possible , will be using 16" or 17" wheels . Are the newer dual pivot lower control arms off 89 cars better ? the rear axle from 89 Shelby Daytona ( bigger bar inside , welded ends ) ...- 6
- 221
-
Using a 40/41TE Torque Converter in a a470/670 transmission.
Transmission, Suspension, Brakes, Tires & WheelsI have a pt cruiser project car and was getting ready to swap the transmission out but haven't thought about the torque converters not being the same. My question is can I use a torque converter from the stock transmission that is in the pt cruiser which is a 40te trans with a a470 trans out of...- 0
- 46
-
installing new rack & pinion
Transmission, Suspension, Brakes, Tires & Wheelsmy rack & pinion on my 1989 Chrysler lebaron seal where the steering shaft goes into it is leaking so I bought a new rack from advance auto do I have to drop the front crossmember? can I put it on jackstands the shop I could have used a lift closed up so ill be doing it in my driveway,,,- 2
- 372
-
3.0 V6 5 speed '91 Daytona
Transmission, Suspension, Brakes, Tires & Wheels3.0 V6 5 speed I have a '91 Shelby 2.5L auto, that I want to swap to a 5 speed. Does a 5 speed from a '91 3.0 Daytona have the same bellhousing? Is that trans the 543? Will that trans work behind a 2.5L?- 8
- 100
Join now to ask and comment!