Turbo Dodge Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
894 Posts
Discussion Starter #1
I in the process of porting my 2 piece intake. I have open the input for 52MM TB and also the runner output to match my ported head.

I have notice that when the injector spray in the runner...there a little wall that fuel hurt... Just for fun i have remove a little meat to improve the quality of the spray... I don't know if it will do anything...My eyes see a big diff...

Check this out and give me a feedback guy!

Thank you
 

Attachments

·
Registered
Joined
·
3,543 Posts
good good!!! Keep it up!
 

·
Administrator
Joined
·
10,119 Posts
guidsm said:
I in the process of porting my 2 piece intake. I have open the input for 52MM TB and also the runner output to match my ported head.

I have notice that when the injector spray in the runner...there a little wall that fuel hurt... Just for fun i have remove a little meat to improve the quality of the spray... I don't know if it will do anything...My eyes see a big diff...

Check this out and give me a feedback guy!

Thank you
need to cut it below the injector too, thats the pinch point in the port.

http://pnw-sdac.org/gallery/view_photo.php?set_albumName=mods&id=Dscn0344
 

·
Registered
Joined
·
894 Posts
Discussion Starter #7
turbovanman said:
Looks good, I will have to check that when I get mine back from my head shop!

Just for fun, hook up the injector and fuel and turn it on, on the stock port, the spray might not even touch it?????

I don't have the car at home to check that...but it's only a feeling , i have nothing to prove it.. WHen you receive your intake take a close look and give me a feedback...

Thank
 
1 - 7 of 7 Posts
Top