[MarkassBauer]

Need just #10 in pic 4418662, 89-92 T1. If I gotta buy the whole rail, or FPR, I will if I must.

Thanks

 

[89Waredaytona]

Need just #10 in pic 4418662, 89-92 T1. If I gotta buy the whole rail, or FPR, I will if I must.

Thanks

Where are you located? I have one..

Sent from my SM-G955U using Tapatalk

 

[turismolover22]

If not, it should just be a 37 degree AN/ JIC fitting. Likely -4 AN (1/4 O/.D.)

 

[GLHNSLHT2]

Nope, it's one of these

a 14mm X 1.50 Fuel Injection / Power Steering Adapter. Male -O-Ring Seal. Aluminum.

https://www.anplumbing.com/adapters/metric-adapters.html


Course then you need an adaper to go down to -4 for the return line.

 

[MarkassBauer]

Thanks guys!
Unfortunately I realized after I posted that only that T1 FPR uses that 14x1.5 thread and I’m using an FPR from a flex fuel rail, which uses a 12x1.0.
Back to the drawing board!
Might use a banjo bolt fitting setup. Idk

 

[2fast2dodge]

I think I have that piece,
I’ll check this week, but you can contact me
At
[email protected]


Sent from my iPhone using Tapatalk