Turbo Dodge Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
187 Posts
Did this for a laugh. This is off of my 88 Grand Voyager. Been like 4months or more behind getting these heads to Ed for my Duster. Stage 2, and the springs + rockers I'm going for.


:dancing:
 

·
Premium Member
Joined
·
5,905 Posts
nice sounding motor!!!LOL i love the sound of a open exhaust 3.0!!!!!
 

·
Registered
Joined
·
187 Posts
Discussion Starter #3
thanks to whoever fixed the thread.

The headgasket went on it. Has a 3spd but it has shifting issues but hasnt been flushed in like 42k miles. has a 2.5l Fuel pump and shuts off when it has less then 1/6th a tank of fuel going around corners cause i took it off my old 87 reliant to fix. it has issues with the 2 MAP sensors i have in it when it was a DD. If it didnt start, i connected it to the other, and it'd start right up. Happened every 20 days or so.

Gonna pull the heads, TB, (even tho I run a 58mm) the valve covers, lower piece of the intake, cam, an extra PRE-SMPI fuel rail, and hopefully the trans. The back room of my shop is getting full with this 88 wrangler with a full fiberglass body.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top