Turbo Dodge Forums banner
1 - 2 of 2 Posts

· Registered
96 Posts
Discussion Starter · #1 ·
I have a 1990 Daytona CS that needs a new pressure plate. It drives fine now, but when the boost get above 10-12psi its just starts slipping. It has a Stage One VNT Turbo upgrade and recalibrated computer. The guy I bought it from figured it was putting out about 200hp. So my question is what pessure plate should i put in it? Ive looked a 3 different ones so far. I figured id go with the TU Dual Performance PLUS Series, but wasnt sure if i needed one that nice. Any ideas?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.