Turbo Dodge Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
4,344 Posts
If you're sure the vacuum lines are all on and are right,then you need to check to make sure the wastegate arm is'nt rusted shut. If you can--put a little regulated(no more than15-20 psi)air pressure to the wastegate actuater can and see if the arm moves.If it doesn't then you either need a new actuater or loosen the Wastegate arm by spraying some PB Blaster,Kroil,or WD 40 on it and "work"it to free it up.
 
1 - 2 of 2 Posts
Top