Turbo Dodge Forums banner
1 - 7 of 14 Posts

· Registered
Joined
·
449 Posts
Discussion Starter · #1 ·
Hi guys i just picked up a 92 shadow with a 2.5 auto. I got this car for free all it needs is brakes and a headgasket. I was wondering how hard is a headgasket to do on these cars? I have done a headswap on my 92 eagle talon tsi and it wasnt too dificult.
 

· Registered
Joined
·
449 Posts
Discussion Starter · #10 ·
Hey guys, i finaly got started on the shadow. Its pretty easy so far. All i have left to finish is drain the coolant, set it to TDC, pull VC, take off DP, lift head off and i think thats it.
 

· Registered
Joined
·
449 Posts
Discussion Starter · #12 ·
Well I got the head off and everything, put a new water pump, timing belt etc. I pulled the head off by myself with both manifolds attached. I was putting it in and i killed the headgasket so now i have to wait to get another one :(. Here are some pics though
HG that came off.



 

· Registered
Joined
·
449 Posts
Discussion Starter · #13 ·
Woot it runs! I got most of it done today and it started up. It idled steady at like 2200 because im still trying to figure out wich connecter goes where on the tb. I have some pics, There is a a main harness part where 3 connecters come off of. 1 goes to the top of the tb and the other 2 dont fit on the isc or the other connecter on the passenger side of the tb




I have one last question. Does anyone have a vacuum diagram? My brother basically broke most of the vacuum hoses trying to get them off.
 
1 - 7 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top