Turbo Dodge Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
649 Posts
Discussion Starter #1
Installed new pass mount,,,still cocked in toward the motor, the bracket keeps tilting upward as the motor sinks downward, ,,,it is the stock mount, with the spacers, ,,either the mount is not right,,,or the bracket is the wrong one for my 87 Shelby z 2.2 5spd.
 

·
Administrator
Joined
·
24,076 Posts
Installed new pass mount,,,still cocked in toward the motor, the bracket keeps tilting upward as the motor sinks downward, ,,,it is the stock mount, with the spacers, ,,either the mount is not right,,,or the bracket is the wrong one for my 87 Shelby z 2.2 5spd.
or the bracket itself is bent...

As already stated, pics Please.
 

·
Registered
Joined
·
649 Posts
Discussion Starter #4
Nevermind,,,the yoke bolt wasn't installed ran the bolt upward into the welded nut, the bolt clamped the bracket together, straightened it up.
 
1 - 4 of 4 Posts
Top