for your consideration:
a TD Garrett/AiResearch TI (i.e. '84-7 "log-TI") compressor housing
to which a 2" long piece of 2-1/8" ID thin-wall aluminum tube was professionally TIG-welded
to form a "spout" inlet similar to -but a bit larger than- the '86-9 Garrett "T2" compressor housing,
then media blasted & coated w/TechLine ColorGuard Titanium ceramic coating
gorgeous finish, ready to bolt on..
the outlet nozzle was lightly ported (could use MUCH more) before coating
PM me yur email or cell # for pix
$35 + ship
PS I have oodles of garrett and mitsu stuff if yu need any parts..
FYI
Exhaust System Coatings
a TD Garrett/AiResearch TI (i.e. '84-7 "log-TI") compressor housing
to which a 2" long piece of 2-1/8" ID thin-wall aluminum tube was professionally TIG-welded
to form a "spout" inlet similar to -but a bit larger than- the '86-9 Garrett "T2" compressor housing,
then media blasted & coated w/TechLine ColorGuard Titanium ceramic coating
gorgeous finish, ready to bolt on..
the outlet nozzle was lightly ported (could use MUCH more) before coating
PM me yur email or cell # for pix
$35 + ship
PS I have oodles of garrett and mitsu stuff if yu need any parts..
FYI
Exhaust System Coatings