Turbo Dodge Forums banner

1 - 20 of 42 Posts

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #1
Okay, Cleaned up my 1989 Turbo mini harness tonight. Removed all the old rotted cloth tape, and retaped the whole harness with nice new sticky friction tape. Looks almost new again.

So I am planning on splicing this bulkhead connector (50 pin) into a 1987 bulkhead (40 pin) and I am coming across some questions, and some needs.

I am currently using a diagram from a 1989 daytona turbo.... plenty of circuits I don't need. But does it accurately reflect the harness of a 89 mini or do I need a 1989 turbo mini specific wiring diagram?? if so, anyone have one they can scan?

Circuits I have not used yet from the 89 :
1(battery feed)
2,3,30,31(park brake switch)
35&36 (windshield wiper motor)
39(Ambient sensor)
40(Ambient sensor)
41(brake sense)
42(distance indicator)
43(ignition switch)
44(fuel flow signal)

Circuits I have not found yet for the 87 harness:
6(charging circuit alternator)
9(fuel pacer lamp)
19(Wiper motor)
20(wiper motor)
37(alternator field term)

So Basically it looks like this so far:

1987 Harness------1989 Harness

1--------7
2--------7
3--------7
4--------47/45/50?
5--------6
6--------?-----------1/43??
7--------27
8--------28
9--------?-----------44?
10-------38
11-------8
12-------37
13-------21
14-------49
15-------45
16-------46
17-------17
18-------18/19?
19-------?----------35/36???
20-------?----------35/36???
21-------32
22-------32
23-------32
24-------26
25-------23
26-------23
27-------19
28-------blank
29-------34
30-------blank
31-------33
32-------24
33-------29
34-------22
35-------48
36-------10
37-------???-------1/43???
38-------49
39-------5
40-------50

Does this look right? Can anyone with experience/knowledge help me?
Thanks in advance. I really can use the help. ~~Heath
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #2
:bump:
 

·
Registered
Joined
·
2,811 Posts
Kid Doc said:
But does it accurately reflect the harness of a 89 mini or do I need a 1989 turbo mini specific wiring diagram?? if so, anyone have one they can scan?

. ~~Heath
Get the van printout, not something you want to do twice.
I just put a van SMEC harness in a SBEC vehicle and the
printout will help you shed a lot of useless wires. You are
probably going to find the van and daytona share same air
and fuel pinouts but now is the time to be sure.
 

·
Registered
Joined
·
236 Posts
I've got a conversion diagram I made when going from 87 L-body to 89 SMEC. It won't let me upload it from my computer for some reason (stupid foreign host error :mad: ). If you want them, I can e-mail them unless you can help me upload it.



Scratch that, search "L-body SMEC conversion". I had the diagram posted in that thread. I'm computer stupid so I don't know how to put the exact link here. I'm an idiot :eek:

Mark
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #6
ALS-- I am doing a 1989 Van harness in a 1987 Charger

RUSS---Thanks, I am doing that as we speak.

MARK----I sent you a PM

UNA------ I sent you a PM with my fax # Thanks much!!!!~~Heath
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #7
Wow, still trying to get a 89 van Bulkhead diagram. Any help is appreciated. :bump:
 

·
Registered
Joined
·
1,947 Posts
Hey Kid,

If you get ahold of one, let me know. I'm needing the 89 turbo van pinout as well.
 

·
Old School Hot Rodder
Joined
·
1,449 Posts
I can post pinouts from my 89 van FSM tonight after I get home. I'll just have to see if Turbododge.com will let me. If not, I'll put it somewhere and post the link. Anything else from the 89 vanm FSM needed?
Bill Vose
1985 LeBaron Mark Cross convertible 2.2L TurboII
1986 Turismo 2.2 (race car)
1989 Grand Caravan 3.0L (for sale)
1993 Grand Caravan 3.3L
 

·
Registered
Joined
·
1,947 Posts
Bill,

If you want, you can email it to [email protected] and I'll post it in this thread.
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #11
Subliminal said:
Hey Kid,

If you get ahold of one, let me know. I'm needing the 89 turbo van pinout as well.
Will do. Are you doing a L body conversion as well?~~Heath
 

·
Registered
Joined
·
1,947 Posts
Naw, 89 van to 85 600es...e body? k? super k? Something like that!

d
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #13
The Van Pinout.... anyone... Buehler...... Buehler.......
 

·
Registered
Joined
·
1,947 Posts
Yeah...something's up with your fax machine, man! I sit right in front of ours, and I watched it all day. All we got were business faxes and promises of free cruises.

:-(

d
 

·
Old School Hot Rodder
Joined
·
1,449 Posts
If whoever needs pinouts will PM me, I can either post it somewhere or email. On the 600ES stuff, I did a TurboII into my 85 LeBaron, which is basicly the same car.
Bill Vose
1985 LeBaron Mark Cross convertible 2.2L TurboII
1986 Turismo 2.2 (race car)
1989 Grand Caravan 3.0L (for sale)
1993 Grand Caravan 3.3L
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #16
PLEASE. I need this. Need the Van pinouts. ~~Heath
 

·
Registered
Joined
·
1,947 Posts
Hey guys...here's the engine side of the van wiring harness. Thanks to Bill for the picture.

If this is copyrighted material, or anyone will get in trouble for anything like that...that's not cool, and I'll delete the files.

damon
 

Attachments

·
Old School Hot Rodder
Joined
·
1,449 Posts
Damon, it's probably copyrighted by Chrysler Corp. It is from my 1989 Caravan-Voyager FSM. I wouldn't really worry too much.
Bill Vose
1985 LeBaron Mark Cross convertible 2.2L TurboII
1986 Turismo 2.2 (race car)
1989 Grand Caravan 3.0L (for sale)
1993 Grand Caravan 3.3L
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #19
Yeah, but now sorting out the wires is something different. first issue.....

1987 Bulkhead wires 15 16 19 20

Do they correspond to 35 36 2 4 ?? Or in a different order??
 

·
Premium Member
Joined
·
2,297 Posts
Discussion Starter #20
Second issue: #6 on the 87 harness goes to ? 49 or 50? on the 89?
 
1 - 20 of 42 Posts
Top