stock radiator fan on an aftermarket radiator?

nice rad! what are the dimensions?

sorry not sure if it's easier to use the stock fan and shroud or if maybe you can get one specific for that rad from Griffen?

plug and play is what im lookin for LOL and i have a spare fan setup so i figured why now. fits it pretty good just dont know how to attach it. the dimensions are 24x16x3" thick. stock is 18x16x2" thick gonna go with it for the RT as well, it actually is the RT radiator LOL

bump!

HEY i found your thread lol, i'll text ya a drawing of how you should make it work lol

Make two standoff brackets that A) mount to the rad or B) mount to the core support/upper rad support, and run over the back of the rad. Talking strips of metal maybe 3/4 inch wide, nothing big. Self tapping screws through the metal (aluminum "bars" are cheap at the hardware store) or 4 nuts and bolts through the bars and the fan shroud, simple as cake.

Zip ties, lots and lots of zip ties. The trick is just to place them strategically in a ghetto fashion.

STLShelbyZ said:

Zip ties, lots and lots of zip ties. The trick is just to place them strategically in a ghetto fashion.

Click to expand...

i am dieing laughing lol

check your email......

Email checked....avatar changed lol

Yes zipties, duct tape, and the old fashioned td style jb weld. Those 3 things will fix that right up for you.
But seriously where are the mounting holes on the rad itself? I dont see any in the pics

and no one mentioned the hot glue gun, WTF

there is none LOL thats why im so freakin lost

You could have a shop weld some brackets on it for you.

Where did you get the radiator from? How much was it?

got it from summit, its was a tad under 200 shipped

Tack weld time, or if jb weld is really that strong, I've never experimented with it....yet!


Time for some bracket making time.

tony get me some measurements of it ALL lol i will text you for more details, i have a metal brake i can bend a bracket for top and bottom