Turbo Dodge Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
221 Posts
Discussion Starter · #1 ·
i am planing on converting my tbi daytona to a turbo 1 mpi and i am not shure how to wire the injectors in if anyone has done this be for or knows how to do this could you tell me?
 

·
Registered
Joined
·
673 Posts
shad0w2.S_tur80 said:
i am planing on converting my tbi daytona to a turbo 1 mpi and i am not shure how to wire the injectors in if anyone has done this be for or knows how to do this could you tell me?
You are far better off just getting a donor turbo harness. What year car is it?

I bet you can get a stock harness for under $100 shipped and be done with it. Otherwise you have to run wires for the wastegate soleniod and the injectors back to either the SMEC or logic module. The connectors on the power mod/smec also won't have a place for the injector wires so you will need to splice in a turbo connector or rig it up.

-Rich
 

·
Registered
Joined
·
221 Posts
Discussion Starter · #3 ·
rfb6435 said:
You are far better off just getting a donor turbo harness. What year car is it?
its a 91 daytona now this donor harness you speak of i hapen to have a 89 turbo shadow with a harness that a bit messup but all the connectors are there could that be of any use?
 
1 - 3 of 3 Posts
Top