[RPMGUY]

Hello, Trying to put the head together on my shadow. What is the torque for the cam caps And the cam sprocket bolt??

Thanks Ryan

 

[NAJ]

Camshaft Sprocket Bolt, 65 Ft. Lbs
Camshaft Bearing Caps, 215 In. Lbs
Camshaft Bearing Cap Tightning Sequense,
1, 5, 9, 7 ,4
2, 6, 10, 8, 3

 

[RPMGUY]

Thank you, does cap number 1 start the sequence. Like cap 1 is 1-2 cap 2 3-4 etc.
Thanks

 

[NAJ]

Cap # 1 being closest to the Cam sprocket and # 5 being at the other end of the head the sequence will be cap #1, 5, 2, 4, 3 in the order I posted earlier.
Be sure the arrows are pointed in the right direction and the caps are put back were they came from. Also put a film of oil on the Cam so it is not starved during startup.

 

[impuresoul2k3]

In my Chilton's book it says to tighten the caps in the reverse order so you should go 10,9,8,7,etc. right?

 

[NAJ]

That is correct being sure the caps are in the right location with the arrows facing the timing belt.