Turbo Dodge Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter #1
Hey guys I am in the middle of removing the transmission on a spirit R/t I just can't seem to get it to come loose. Can anyone tell me what bolts I amy have missed or what might need to be taken off. I have the transmission mount on the drivers side removed I have removed 3 bolts and one nut from the top of the bell housing. I have removed the bobble strut bolt. I have also removed the Front transmisson mount bolt and the rear bolt. Question do I need to remove the Starter am thinking so but have seen no mention in the forum. Most I have seen is unbolt this and remove that the book I have is just about as good. So I have no reference to "see" what needs to be done.

Please help.. Thank you for your time.

David
 

·
Registered
Joined
·
3,543 Posts
Hey. Wrong section of the forum but that's ok.

Yes, you will have to remove the starter.
 
1 - 3 of 3 Posts
Top