Turbo Dodge Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello folks,

I have a 1985 dodge 600 convertible. It has a stock Turbo 1 in it and I am toying with the idea of programming a new ROM for my logic module to set higher limits on the boost. I understand the limiting factor for the stock engine is the injectors not being up to the job. I am wondering whether standard injectors from other brands of car will swap in, like from a mustang engine for instance. Is there a standard used/scrap/cheap swap to get around 40pph or more flow?

Thanks,
Mark
 

· Registered
Joined
·
2,400 Posts
The limiting factor is the crappy log intake and lack of intercooling otherwise 33lb from a turbo 2 or 2.5 turbo will bolt in or you can get some turbo coupe injectors are somewhere around the 40 lb range but may need some washers installed to jack the rail up slightly for the taller injector, also some flex fuel injectors will fit and are somewhere around 40 lb too.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top