Turbo Dodge Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
I am at the wiring portion of my trans swap.. Anyone have a wiring diagram so i know what i need to do...

atx had 2 sensors
mtx has 1
I assume 1 on the atx is reverse lights and 1 is neutral safety?
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
89 dodge daytona 2.5L ... had an auto now it will have a 523 out of a 92 spirit.. I swapped the speed sensor off the auto. Just need to wire in the reverse light sensor...

Just the atx had speed sensor and 2 other sensors... So i need to know what wires/sensors are what...
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #4 ·
I think i found it...
2 pin plug is the torque convertor solenoid
3 pin is the reverse/neutral safety ... Now to figure out which one to ground...
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #5 ·
I got it... Finally went out and looked at it.. There were 3 wires
purple w/black
white
brown w/yellow maybe..

Well the new sensor had
purple w/black
white

Kinda narrowed it down.. She fired right up..
 
1 - 5 of 5 Posts
Top