Turbo Dodge Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,556 Posts
Discussion Starter · #1 ·
Looking for 15x8 rims to fit our bolt pattern. If spacer is required that's no problem.


Also looking for a pair of these 15x7 American Racing rims:


Carl
 

·
Registered
Joined
·
2,288 Posts
try a set of 15 x 6.5 "crab" rims of an 86 shelby z cs or 87 shelby z daytona! you really dont need anything wider than that!
 

·
Registered
Joined
·
1,871 Posts
Look for the aftermarket wheels for the Audi TT. Those and the VW golf and jetta have 5x100 bolt pattern. I usually see 17x8 wheels for the TT for acution on ebay.

Wink

I have my heart set on a 17x8 wheels for the baron as well. But I was hoping to do the 5x4.5" hubswap from the later caravans.
 

·
Registered
Joined
·
1,556 Posts
Discussion Starter · #4 ·
mwinkle353 said:
Look for the aftermarket wheels for the Audi TT. Those and the VW golf and jetta have 5x100 bolt pattern. I usually see 17x8 wheels for the TT for acution on ebay.

Wink

I have my heart set on a 17x8 wheels for the baron as well. But I was hoping to do the 5x4.5" hubswap from the later caravans.
I think the old Fieros also had our bolt pattern. But I can't use 17s or narrower rims because this is for drag racing.

With the later caravan hubswap, what else is and is not compatible?
 
1 - 4 of 4 Posts
Top