[Hodgie1013]

Just looking for an NA head for an 86. Anything will work. I'm not looking to put too much work into it, I'd rather just throw it on and run it if possible. Let me know if anybody has something decent laying around. Thanks guys.

Matthew Haugland

 

[allmotor]

hey, i got a 86 kcar with good motor. u pull head u can have $20

 

[mrglenn]

i have a 85 k car looking for a decent body in michigan any ideas

 

[moparfwdsleeper]

I have a G head, shaved, ported, MP 061 springs, IIRC +1mm valves... If you wanting something like that of course

 

[22dodge]

I have a 287 head, milled .100" big valves, ported, flow benched, MP .550" cam, solid lash adjusters, titainum retainers, $1500

 

[detobias]

hard to find used heads without some cracks..

I've got a decent 86 swirl with the usual cracks between the valves ; came off a good running car but no guarantees $35 + ship ; PM me yur email and I cans end some pix

head has no cam but is assembled with valves & springs ; Turbo Valves too not that it really matters..

this would be a good time for you to upgrade to a 88+ roller cam

I'm a good seller checke my feedback <---

 

[paulharbosky]

I have a stock one $60 shipped. Ill throw in a headgasket.(Detroit Gasket)