Replace the turn signal cancel cam, you'll see it as soon as you pull the steering wheel.

-Chuck James

 

where would it be? like after I pull the steering wheel, and where can I get a replacement cam?

 

Junkyard or dealer. i say junkyard from a similar car similar yr

 

Check some of your local parts stores in the Help section. They shuld have a Chrysler turn signal repair kit. It is the top part ofthe switch and contains the locking tabs that hold the switch in the turn position. If you have cornering lights like mine, you will probably have to go to the dealer or a junkyard.

 

how's your alignment? If the steering wheel is off the turn signal won't stay locked over. But yes, just pull the steering wheel off, then you have to fit with a locking clip, dig that out and don't worry about putting it back. and under there you'll see the turn signal guts. It's fairly easy to see how it works.

 

there is a tiny plastic nub that holds the signals in place, they break in time. ive had to replace the turnsignal switch in every omni ive owned. any parts store has them.